【CASK EFFECT】0910G阅读全方位锻炼--难度【LSAT】1-24

草木也知愁UID: 2487572

【CASK EFFECT】0910G阅读能力基础自测（速度、难度、深度、越障、真题、RAM）
https://bbs.gter.net/forum.php?mod=viewthread&tid=910464&highlight

【CASK EFFECT】0910G阅读全方位锻炼--难度【LSAT】汇总贴
https://bbs.gter.net/thread-982016-1-1.html


【规则】

每天我贴出一篇LSAT阅读文章，大家来做，做完后可以拿上来讨论或者写一些心得体会，大家共同切磋

每天一篇LSAT，你就会渐渐发现GRE阅读真的好简单

[注]请直接在电脑屏幕面前做，虽然GRE阅读是在纸上考，但是通过这个过程会遏制你做笔记，同时给你的阅读造成视觉障碍，也就是把难度训练和抗干扰训练同步结合，增加效率（初期会很累，但是既然大家想要成为高手，那么就别对自己太温柔


Although the United States steel industry faces widely publicized economic problems that have eroded its steel production capacity, not all branches of the industry have been equally affected. The steel industry is not monolithic: it includes integrated producers, minimills, and specialty-steel mills. The integrated producers start with iron ore and coal and produce a wide assortment of shaped steels. The minimills reprocess scrap steel into a limited range of low-quality products, such as reinforcing rods for concrete. The specialty-steel mills are similar to minimills in that they tend to be smaller than the integrated producers and are based on scrap, but they manufacture much more expensive products than minimills do and commonly have an active in-house research-and-development effort.
Both minimills and specialty-steel mills have succeeded in avoiding the worst of the economic difficulties that are afflicting integrated steel producers, and some of the mills are quite profitable. Both take advantage of new technology for refining and casting steel, such as continuous casting, as soon as it becomes available. The minimills concentrate on producing a narrow range of products for sale in their immediate geographic area, whereas specialty-steel mills preserve flexibility in their operations in order to fulfill a customer’s particular specifications.
Among the factors that constrain the competitiveness of integrated producers are excessive labor, energy, and capital costs, as well as manufacturing inflexibility. Their equipment is old and less automated, and does not incorporate many of the latest refinement in steelmaking technology. (For example, only about half of the United States integrated producers have continuous casters, which combine pouring and rolling into one operation and thus save the cost of separate rolling equipment.) One might conclude that the older labor-intensive machinery still operating in United States integrated plants is at fault for the poor performance of the United States industry, but this cannot explain why Japanese integrated producers, who produce a higher-quality product using less energy and labor, are also experiencing economic trouble. The fact is that the common technological denominator of integrated producers is an inherently inefficient process that is still rooted in the nineteenth century.
Integrated producers have been unable to compete successfully with minimills because the minimills, like specialty-steel mills, have dispensed almost entirely with the archaic energy and capital-intensive front end of integrated steelmaking: the iron-smelting process, including the mining and preparation of the raw materials and the blast-furnace operation. In addition, minimills have found a profitable way to market steel products: as indicated above, they sell their finished products locally, thereby reducing transportation costs, and concentrate on a limited range of shapes and sizes within a narrow group of products that can be manufactured economically. For these reasons, minimills have been able to avoid the economic decline affecting integrated steel producers.
21.Which one of the following best expresses the main idea of the passage?
(A) United States steel producers face economic problems that are shared by producers in other nations.
(B) Minimills are the most successful steel producers because they best meet market demands for cheap steel.
(C) Minimills and specialty-steel mills are more economically competitive than integrated producers because they use new technology and avoid the costs of the iron-smelting process.
(D) United States steel producers are experiencing an economic decline that can be traced back to the nineteenth century.
(E) New steelmaking technologies such as continuous casting will replace blast-furnace operations to reverse the decline in United States steel production.
22.The author mentions all of the following as features of minimills EXCEPT
(A) flexibility in their operations
(B) local sale of their products
(C) avoidance of mining operations
(D) use of new steel-refining technology
(E) a limited range of low-quality products
23.The author of the passage refers to “Japanese integrated producers” (line 43) primarily in order to support the view that
(A) different economic difficulties face the steel industries of different nations
(B) not all integrated producers share a common technological denominator
(C) labor-intensive machinery cannot be blamed for the economic condition of United States integrated steel producers
(D) modern steelmaking technology is generally labor-and energy-efficient
(E) labor-intensive machinery is an economic burden on United States integrated steel producers
24.Which one of the following best describes the organization of the third paragraph?
(A) A hypothesis is proposed and supported; then an opposing view is presented and criticized.
(B) A debate is described and illustrated: then a contrast is made and the debate is resolved.
(C) A dilemma is described and cited as evidence for a broader criticism.
(D) A proposition is stated and argued, then rejected in favor of a more general statement, which is supported with additional evidence.
(E) General statements are made and details given; then an explanation is proposed and rejected, and an alternative is offered.
25.It can be inferred from the passage that United States specialty-steel mills generally differ from integrated steel producers in that the specialty-steel mills
(A) sell products in a restricted geographical area
(B) share the economic troubles of the minimills
(C) resemble specialty-steel mills found in Japan
(D) concentrate on producing a narrow range of products
(E) do not operate blast furnaces
26.Each of the following describes an industry facing a problem also experienced by United Stated integrated steel producers EXCEPT
(A) a paper-manufacturing company that experiences difficulty in obtaining enough timber and other raw materials to meet its orders
(B) a food-canning plant whose canning machines must constantly be tended by human operators
(C) a textile firm that spends heavily on capital equipment and energy to process raw cotton before it is turned into fabric
(D) a window-glass manufacturer that is unable to produce quickly different varieties of glass with special features required by certain customers
(E) a leather-goods company whose hand-operated cutting and stitching machines were manufactured in Italy in the 1920s
27.Which one of the following, if true, would best serve as supporting evidence for the author’s explanation of the economic condition of integrated steel producers?
(A) Those nations that derive a larger percentage of their annual steel production from minimills than the United States does also have a smaller per capita trade deficit.
(B) Many integrated steel producers are as adept as the specialty-steel mills at producing high-quality products to meet customer specifications.
(C) Integrated steel producers in the United States are rapidly adopting the production methods of Japanese integrated producers.
(D) Integrated steel producers in the United States are now attempting to develop a worldwide market by advertising heavily.
(E) Those nations in which iron-smelting operations are carried out independently of steel production must heavily subsidize those operations in order to make them profitable.

草木也知愁UID: 2487572

update

tuziduiduiUID: 2599524

２４了？
那得马上更新了～～～
消失了一段～～～

lghscuUID: 2552043

解决

lghscuUID: 2552043

题目分析请点击
[CASK EFFECT] 难度【LSAT】1-24 解读

bobo19890313UID: 2622130

我的答案： C C C D  B  A A  哎，错的不少，接着看。。。

bobo19890313UID: 2622130

第二题为何错我明白喽，呵呵，whereas specialty-steel mills preserve flexibility in their operations in order to fulfill a customer’s particular specifications.明明看到这个A选项是special的。。哎。第4题还是没有分清楚哪个是第三段。。。第5题根据冒号后面的就可以做题 the iron-smelting process, including the mining and preparation of the raw materials and the blast-furnace operation.第6题没有搞清楚问的题目。。第7题只要知道本文的原因和结果，这样就可以了解到E是与operation有关的选项。。

mai1346UID: 2632426

倒数第二题竟然没看见except，而且还选了一个出来！足见没看懂。继续努力！