- 最后登录
- 2008-10-11
- 在线时间
- 0 小时
- 寄托币
- 2672
- 声望
- 0
- 注册时间
- 2004-10-21
- 阅读权限
- 30
- 帖子
- 5
- 精华
- 3
- 积分
- 2052
- UID
- 182980
 
- 声望
- 0
- 寄托币
- 2672
- 注册时间
- 2004-10-21
- 精华
- 3
- 帖子
- 5
|
续
Yang LENG
Associate Professor
(2358 7185 ; meleng@ust.hk)
PhD, University of Virginia (1989)
Research Engineer, Mechanical Engineering Research Institute, Chongqing (1982-84)
Current Research Activities:
Mechanical behavior of engineering materials; biomedical materials; novel materials processing.
Active Projects as Principal Investigator: Developing visual tools for crystal structures and reciprocal lattice
Teaching Development Grants - Matching Grant HK$140,000 06 Jan 2004
Processing and properties of hydroxyapatite coatings on porous metal implants
RGC - Competitive Earmarked Research Grant HK$504,596 31 Dec 2001
Engineering titanium surfaces for hard tissue implants
RGC - Competitive Earmarked Research Grant HK$453,404 31 Dec 2002
Bioactivity study of bioceramics using transmission electron microscopy
RGC - Competitive Earmarked Research Grant HK$412,070 31 Dec 2003
Representative Research Publications:
Lu, Xiong, Leng, Yang (2004) "TEM Study of Calcium Phosphate Precipitation on Bioactive Titanium Surfaces", Biomaterials, Vol. 25, pp. 1779-1786.
Yan, Liling, Leng, Yang, Weng, Lutao (2003) "Characterization of chemical inhomogeneity in plasma-sprayed hydroxyapatite coatings", Biomaterials, Vol. 24(15), pp. 2585-2592.
Lu, Xiong, Leng, Yang (2003) "Quantitative Analysis of Human Osteoblasts Behavior on Microgrooved Hydroxyapatite and Titanium Substata", Journal of Biomedical Materials Research, Vol 66A pp. 677-687.
Leng, Y., Chen, J.Y., Qu, S.X. (2003) "TEM Examinations of Calcium Phosphate Precipitation on HA/TCP", Biomaterials, Vol. 24/13, pp. 2125 - 2131.
Yan, L.L., Leng, Y., Chen, J.Y. (2003) "Torsional Fatigue Resistance of Plasma Sprayed HA Coatings on Ti-6Al-4V", Journal of Materials Science: Materials in Medicine, Vol. 14/4, pp. 291-295.
Hu Y, Hb, Lin, Cj, Lui, Py, Leng, Y. (2002-2003) "Electrochemical Deposition Of Hydroxyapatite With Vinyl Acetate On Titanium Implants", Journal of Biomedical Materials Research, Vol. 65 (2003) pp. 24-29.
Gu, Jl, Leng, Y., Gao, Yo, Liu, Ho, Kang, Fy, She, Wn (2002) "Fracture Mechanism of Flexible Graphite Sheets", Carbon, Vol. 40, pp. 2169-2176.
Chan, Hong Shing, Leng, Yang, Gao, Furong (2001-2002) "Processing of PC/LCP In Situ Composites by Closed-Loop Injection Molding", Composite Science and Technology, 62, 757-765.
--------------------------------------------------------------------------------
Huihe QIU
Associate Professor
(2358 7190 ; meqiu@ust.hk)
PhD, Erlangen-Nuremberg University (1994)
Current Research Activities:
Coherent optical diagnostics; micro-optical sensors; multiphase flows and heat transfer; micro-casting and cooling.
Active Projects as Principal Investigator: Characterization of slip flows and microscale effects in microchannels
RGC - Competitive Earmarked Research Grant HK$400,430 31 Dec 2003
Laser heating of a liquid bridge in a mini/micro channel
RGC - Competitive Earmarked Research Grant HK$964,209 31 Dec 2001
Heat transfer and dynamics characteristics of ultrasound induced pulsating microbubbles in a microchannel
RGC - Competitive Earmarked Research Grant HK$827,404 31 Dec 2002
Representative Research Publications:
Qiu, Hui He, Hsu, Chin Tsau (2004) "The Impact of High Order Refraction on Optical Microbubble Sizing in Multiphase Flows", Experiments in Fluids, 36, 100-107.
Qiu, Huihe, Tian, Jindong, Hsu, Chintsau (2003) "Characterization of Laser Induced Microbubbles and Fluid Flows Using PIV and PDA", 7th Asian Symposium of Visualization, Singapore, paper no. 1B-7.
Wang, Wei, Qiu, Huihe, Cheng, Ping (2003) "Deformation and Solidification of Droplet Impact with Variable Thermal Contact Resistance", ASME SUMMER HEAT TRANSFER CONFERENCE, Las Vegas, Nevada, USA, HT2003-47056.
Jia, Wang Cun, Qiu, Hui He (2003) "Experimental Investigation of Droplet Dynamics and Heat Transfer in Spray Cooling", Experimental Thermal and Fluid Sciences, 27, pp829-838.
Wang, Wei, Qiu, Huihe, Cheng, Ping (2003) "Deformation and solidification of droplet impact with variable thermal contact resistance", ASME Summer Heat Transfer Conference, Las Vegas, Nevada, USA, HT2003-47056, pp. 1-10.
Qiu, Huihe (2003) "Eliminating High-Order Scattering Effects in Optical Microbubble Sizing", Journal of the Optical Society of America A, Vol. 20, No. 4, pp. 690-697.
Jia, Wangcun, Qiu, Huihe (2003) "Experimental Investigation of Droplet Dynamics and Heat Transfer in Spray Cooling", Experimental Thermal and Fluid Sciences, 27, pp. 829-838.
Qiu, Huihe, Hsu, Chin Tsau (2003) "The Impact of High Order Refraction on Optical Microbubble Sizing in Multiphase Flows", Experiments in Fluids.
--------------------------------------------------------------------------------
Qingping SUN
Associate Professor
(2358 8655 ; meqpsun@ust.hk ; http://www-mech.ust.hk/~meqpsun)
PhD, Tsinghua University (1989)
Professor, Tsinghua University (1994)
Visiting Professor, Uni- versity of Metz, France (1994, 1996, 1998)
Current Research Activities:
Shape memory alloy single and polycrystals; phase transition and material instability and propagation in solid; implant biomaterials and nano-micro tribology.
Active Projects as Principal Investigator: Wear of NiTi shape memory alloy on micro- and sub-micro scales --experimental study on the role of phase transformation
RGC - Competitive Earmarked Research Grant HK$435,351 31 Dec 2003
Martensite band nucleation in superelastic NiTi polycrystalline shape memory alloys - experimental study on local vs. nonlocal effects
RGC - Competitive Earmarked Research Grant HK$435,166 31 Dec 2001
Experimental study on martensite detwinning in NiTi polycrystalline shape memory alloy microtubes
RGC - Competitive Earmarked Research Grant HK$683,404 01 Jul 2002
The scale effects on the behavior of materials used in micro/nano systems
National Natural Science Foundation of China / Research Grants Council Joint Research Scheme HK$500,600 01 Jan 2002
Representative Research Publications:
Qian, Linmao, Xiao, Xudong, Sun, Qingping, Yu, Tongxi (2004) "Anomalous relationship between hardness and wear properties of a superelastic nickel-titanium alloy", Applied Physics Letter, Vol. 84, No. 7, pp. 1076-1078.
Yu, Xiangbin, Sun, Qingping, Zhong, Zheng (2004) "Effect of Elastic Matrix Constraint on the Tensile Deformation of NiTi Superelastic Fiber", Int. J. Solids Struct., 41, pp. 2659-2683.
Wang, Biao, Woo, Chunho, Sun, Qingping, Yu, Tongxi (2003) "Critical thickness for dislocation generation in epitaxial piezoelectric thin films", Philosophical Magazine, Vol. 83, Nos. 31-34, pp, 3753-3764.
Zhong, Zheng, Sun, Qingping, Yu, Xiangbin (2003) "Elastic Solutions of a Cylindrical Rod Containing Periodically Distributed Inclusions with Axisymmetric Eigenstrains", Acta Mechanica, Vol. 166, pp. 169-183.
Zhong, Zheng, Sun, Qingping (2002) "Analysis of a Transversely Isotropic Rod Containing a Single Cylindrical Inclusion with Axisymmetric Eigenstrains", Int. J. of Solids and Structure, 39, pp. 5753-5765.
Liu, Cheng, Sun, Qingping, Zhao, Yapu, Yu, Tongxi (2002) "Depth dependence of nanohardness in a CuAlNi single crystal shape memory alloy", Int. J. Nonlinear Sci. & Numerical Simulation, 3, pp. 535-538.
Gong, Fengfei, Sun, Qingping (2002) "Fabrication and characterization of NiTi shape memory alloy thin films by RF magnetron sputtering for MEMS applications", Int. J. Nonlinear Sci. & Numerical Simulation, 3, pp. 379-382.
Zhong, Zheng, Yu, Xiangbin, Sun, Qingping, Yu, Tongxi, Huang, Hanchen (2002) "Modeling of Phase Transformation in a Transversely Isotropic SMA Rod", Key Engineering Materials, Vols. 233-236, pp. 649-654.
--------------------------------------------------------------------------------
Jingshen WU
Associate Professor
(2358 7200 ; mejswu@ust.hk)
PhD, University of Sydney (1994)
Australian Research Council (ARC) Post-doctoral Fellow (1995-96)
Current Research Activities:
Processing-morphology-property relationships of polymer nanocomposites; characterization and failure analysis of microelectronic packages; polymers in bio-engineering applications.
Active Projects as Principal Investigator: Structure, property and modification of low cost nanocomposites for electronic packaging applications
ASAT Limited HK$1,458,000 01 Oct 2002
Structure, property and modification of low cost nanocomposites for electronic packaging applications
UGC - Government's Matching Grant Scheme HK$36,450 01 Oct 2003
Deformation and fracture mechanisms for semi-crystalline polymer composites with nanoscale inorganic fillers
RGC - Competitive Earmarked Research Grant HK$433,404 01 Sep 2002
Processing and characterization of a new class of polymer based nanocomposites reinforced by halloysite nanotubes
RGC - Competitive Earmarked Research Grant HK$414,980 31 Dec 2003
Representative Research Publications:
Liu, Jia, Wu, Jingshen (2003-2004) "A comprehensive study on intercalation and exfoliation of epoxy/clay nanocomposites", ACCM-4, Society of Asian-Australasian Conference on Composite Materials, Sydney, Australia, Proceedings of ACCM-4, paper no. A-685.
Li, Jianxiong, Wang, Qiang, Chan, Chi-Ming, Wu, Jingshen (2003-2004) "Effect of molding temperature on crystalline and phase morphologies of HDPE composites containing PP nano-fibers", Polymer, Vol 45, pp 5719-5727.
Mclellan, Neil, Fan, Nelson, Liu, Shilai, Lau, Kim, Wu, Jingshen (2003-2004) "Effects of Wafer Thinning Condition on the Roughness, Morphology and Fracture Strength of Silicon Die", Journal of Electronic Packaging, Vol. 126, pp110-114.
Wang, Ke, Wu, Jingshen, Ye, Lin, Zeng, Hanmin (2003-2004) "Mechanical Properties and toughening mechanisms of polypropylene/barium sulfate composites", Composites, Part A: applied science and manufacturing, Vol 34, pp 1199-1205.
Wu, Jingshen, Wang, Ke, Chen, Ling, He, Chaobin, Yee, Albert F. (2003-2004) "Micro-deformation and fracture behaviour of epoxy based nanocomposites with highly exfoliated pristine clay", Proceedings of ANTEC 2004, Society of Plastics Engineers, Chicago, USA, ANTEC2004, pp1790-1794.
Wu, Jingshen, Wang, Ke, Liu, Jia, Chen, Ling, He, Chaobin (2003-2004) "Producing polymer nanocomposites with exfoliated pristine clay", Proceedings of ANTEC, Society of Plastics Engineers, Chicago, USA, ANTEC2004, pp1728-1732.
Zhang, Yan, Chan, Chi-Ming, Wu, Jingshen (2003-2004) "Tensile property, morphology and micro-deformation of polypropylene/CaCO3 nanocomposites", Proceedings of ANTEC 2004, ANTEC 2004, pp1795-1799.
Chen, Haibin, Karger-kocsis, Joseph, Wu, Jingshen, Varga, J. (2002) "Fracture Toughness of alpha- and Beta-Phase Polypropylene Homopolymers and Random- and Block-Copolymers", Polymer, 43, 6505-6514.
--------------------------------------------------------------------------------
Tianshou ZHAO
Associate Professor and Associate Director, Center for Energy and Thermal Systems
(2358 8647 ; metzhao@ust.hk ; http://www.me.ust.hk/~mezhao)
PhD, University of Hawaii (1995)
Lecturer, Tianjin University (1986-91)
Current Research Activities:
Fuel cell; microscale heat transfer; phase-change flow and heat transfer in capillary structures; electronic cooling; heat pipes; advanced air conditioning and refrigeration systems.
Active Projects as Principal Investigator: Investigations of electrokinetically assisted micro capillary evaporators
RGC - Competitive Earmarked Research Grant HK$473,404 31 Dec 2002
Heat transfer in microfabricated silicon phase-change pumping devices
RGC - Competitive Earmarked Research Grant HK$727,558 31 Dec 2001
Heat transfer effects on electro-osmotic pumping of liquids on microchips
RGC - Competitive Earmarked Research Grant HK$740,329 31 Dec 2003
Representative Research Publications:
Ma, Zhiqi, Cheng, Ping, Zhao, Tianshou (2003-2004) "A Palladium-Alloy Deposited Nafion Membrane for Direct Methanol Fuel Cells", J. Membrane Science, 215, pp.327-335.
Guo, Zhaoli, Zhao, Tianshou (2003-2004) "Analysis of film condensation heat transfer inside a vertical micro tube with consideration of the meniscus draining effect", Int. J. Heat Mass Transfer, 46, 4669–4679.
Guo, Zhaoli, Zhao, Tianshou (2003-2004) "Discrete velocity and lattice Boltzmann models for binary mixtures of nonideal fluids", Physical Review E, Rapid Communication, 68, 035302R.
Liao, Qiang, Zhao, Tianshou (2003-2004) "Modeling of Taylor Bubble Rising in a Vertical Mini Non-Circular Channel Filled with a Stagnant Liquid", Int. J. Multiphase Flow, Vol. 29 (3), pp.411-434.
Ma, Zhiqi, Cheng, Ping, Zhao, Tianshou (2003) "A palladium-alloy deposited nafion membrane for direct methanol fuel cells", Journal of Membrane Science, Vol. 215, pp.327-336.
Guo, Zhaoli, Zhao, Tianshou (2003) "Explicit finite-difference lattice Boltzmann method for curvilinear coordinates", Physical Review E, Vol. 67, No. 6, 066709.
Liao, Qiang, Zhao, Tianshou (2003) "Modeling of Taylor Bubble Rising in a Vertical Mini Non-Circular Channel Filled with a Stagnant Liquid", International Journal of Multiphase Flow, Vol. 29(3), pp. 411-434.
Liao, Shenming, Zhao, Tianshou (2002) "A Numerical Investigation of Laminar Convection of Supercritical Carbon Dioxide in Vertical Mini/micro Tubes", Progress in Computational Fluid Dynamics, Vol. 2, No. 2, pp. 144-152.
--------------------------------------------------------------------------------
Yitshak ZOHAR
Associate Professor
(2358 7194 ; mezohar@ust.hk)
PhD, University of Southern California (1990)
Current Research Activities:
Micro-electromechanical systems: micro-sensors, microactuators, micromechanics; fluidic and thermal microsystems; bio-MEMS.
Representative Research Publications:
Lee, Man, Wong, Man, Zohar, Yitshak (2003) "Characterization of an integrated micro heat pipe", Journal of Micromechanics and Microengineering, 13, 58-64.
Lee, Man, Wong, Man, Zohar, Yitshak (2003) "Integrated micro-heat-pipe fabrication technology", IEEE Journal of Microelectromechanical Systems, 12(2), 139-146.
Lee, Man, Wong, Yiu Yan, Wong, Man, Zohar, Yitshak (2003) "Size and shape effects on two-phase flow patterns in microchannel forced convection boiling", Journal of Micromechanics and Microengineering, 13(1), 155-164.
Hau, Winky Lap Wing, Trau, Dieter, Sucher, Nikolaus, Wong, Man, Zohar, Yitshak (2003) "Surface-chemistry technology for microfluidics", Journal of Micromechanics and Microengineering, 13, 272-278.
Zohar, Yitshak (2002) Heat Convection in Micro Ducts, Kluwer Academic Publishers.
Zohar, Yitshak, Lee, Sylvanus Yuk Kwan, Lee, Wing Yin, Jiang, Linan, Tong, Pin (2002) "Subsonic gas flow in a straight and uniform microchannel", Journal of Fluid Mechanics, Vol. 472, pp. 125-151.
Lee, Sylvanus Yuk Kwan, Yu, Zeta Tak For, Wong, Man, Zohar, Yitshak (2002) "Gas flow in a microdevice with a mixing layer configuration", Journal of Micromechanics and Microengineering, 12, 96-102.
Lee, Wing Yin, Wong, Man, Zohar, Yitshak (2002) "Microchannels in series connected via a contraction/expansion section", Journal of Fluid Mechanics, 459, 187-206.
--------------------------------------------------------------------------------
Yi-Kuen LEE
Assistant Professor
(2358 8663 ; meyklee@ust.hk ; http://ihome.ust.hk/~meyklee)
PhD, University of California, Los Angeles (2001)
Research Assistant, University of California, Los Angeles (1997-2001)
Current Research Activities:
Bio-MEMS, especially biosensor chip; micro thermal inkjet; micro capillary electrophoresis chip; micro inertia sensor chip; micro micro particle image velocimetry; micro chaotic mixing; DNA fluorescence microscopy.
Active Projects as Principal Investigator: Development of bio-microelectromechanical system (Bio-MEMS) technology
Alit International Trade (Hong Kong) Co., Ltd. HK$39,000 01 Aug 2003
Active micromixer - a building block for integrated microsystems
RGC - Direct Allocation Grant HK$100,000 01 Nov 2001
Chaotic mixing in microsystems
France / Hong Kong Joint Research Scheme HK$29,000 01 Jan 2004
Development of bio-microelectromechanical system (Bio-MEMS) technology
UGC - Government's Matching Grant Scheme HK$3,900 01 Aug 2003
High-throughput micro electroporation cell chip technology for DNA transfection
UGC - Government's Matching Grant Scheme HK$7,748 01 Jan 2004
Micro thermal bubble actuators to enhance DNA hybridization
RGC - Competitive Earmarked Research Grant HK$784,404 01 Jul 2002
Integrated free-solution electrophoresis micro-systems for DNA separation
RGC - Competitive Earmarked Research Grant HK$473,404 31 Dec 2002
Integrated nano bubble actuator
RGC - Competitive Earmarked Research Grant HK$348,235 01 Sep 2004
Fabrication and characterization of micromixers
The Institute of Integrated Micro Systems HK$510,000 01 Jul 2002
High-throughput micro electroporation cell chip technology for DNA transfection
Kenreal International Trading Co. Ltd. HK$78,000 01 Jan 2004
Representative Research Publications:
Ng, Alex Siu Wai, Hau, Winky Lap Wing, Lee, Yi-Kuen, Zohar, Yitshak (2004) "Electrokinetic generation of microvortex patterns in a microchannel liquid flow", Journal of Micromechanics and Microengineering, Vol. 14, No. 2, pp. 247-255.
Lee, Man, Chung, Luthur Siu Lung, Lee, Yi-Kuen, Wong, Man, Zohar, Yitshak (2004) "Height Effect on Nucleation-Site Activity in Microchannel Convective Boiling", IEEE 17th International Conference on Micro Electro Mechanical System (MEMS 2004),Maastricht, Netherlands, Jan 25-29, pp.300-303.
Lao, Alex Ieng Kin, Lee, Yi-Kuen, Hsing, I-Ming (2004) "Mechanistic Investigation of Nanoparticle Motion in Pulsed Voltage Miniaturized Electrical Field Flow Fractionation Device by in Situ Fluorescence Imaging", Analytical Chemistry, Vol. 76, No. 10, pp.2719-2724.
Deng, Peigang, Lee, Yi-Kuen, Cheng, Ping (2004) "Micro Bubble Dynamics in DNA solutions", Journal of Micromechanics and Microengineering, Vol. 14, No. 5, pp.693-701.
Wong, Pak Kin, Lee, Yi-Kuen, Ho, Chih-Ming (2003) "Deformation of DNA Molecules by Hydrodynamic Focusing", Journal of Fluid Mechanics, Vol. 497, pp.55-65.
Hau, Winky Lap Wing, Lee, Lap Man, Lee, Yi-Kuen, Zohar, Yitshak (2003) "Electrically Driven Vortical Motion for Mixing of Liquids in a Microchannel", Seventh International Conference on Miniaturized Chemical and Biochemical Analysis Systems (µTAS 2003), Oct 5-9, Squaw Valley, California, USA, pp. 491-494.
Niu, Xize, Lee, Yi-Kuen (2003) "Finite Time Lyapunov Exponent for Micro Chaotic Mixer Design", ASME International Mechanical Engineering Congress and Exposition (IMECE) Washington DC, Nov. 16-21, IMECE2003-41389.
Niu, Xize, Lee, Yi-Kuen (2003) "Efficient Spatial-temporal Chaotic Mixing in Microchannels", Journal of Micromechanics and Microengineering, Vol. 13, No. 3, pp. 454-462.
--------------------------------------------------------------------------------
Man Lung SHAM
Visiting Assistant Professor
(2358 7205 ; meivan@ust.hk)
PhD, Hong Kong Univ Sci & Technol (2003)
Senior Process Engineer, R & D Department, ASM Assembly Automation Ltd. (2003)
Research Assistant, Dept of Aero & Mech Eng., Sejong Univ., Seoul, Korea (2002)
Process Engineer, R & D Department, ASM Assembly Automation Ltd. (1998-2000)
Research Assistant, Dept of Textile Eng., Kyoto Institute of Technol., Kyoto, Japan (1997)
Current Research Activities:
Graphite Intercalated Nano-composite, Nanoscale Characterization, Residual Stress Analysis in Electronic Packaging, Thermosonic Au Flip Chip Bonding
Representative Research Publications:
Sham, M.L., Kim, J.K. (2003) "Adhesion characteristics of underfill material with various package components", accepted in Journal of Adhesion Science & Technology.
Sham, M-L, Kim, J-K (2003) "Design for reliability: a study of thermal performance of flip chip packages", International IEEE Conference on Business of Electronic Product Reliability and Liability, Hong Kong & Shenzhen, pp. 103-110.
Sham, M.L., Kim, J.K., Park, J.H. (2003) "Thermal performance of flip chip packages: numerical study of thermo-mechanical interactions", International Conference on Electronic Packaging (ICEP), Tokyo, Japan, Apr., 2003, pp.91-96.
Sham, M.L., Kim, J.K., Park, J.H. (2003) "Viscoelastic Properties of Underfill for Numerical Analysis of Flip Chip Packages", 53rd Electronic Component Technology Conference (ECTC), May, New Orleans, USA, pp. 560-566.
Kim, J-K, Sham, M-L, Hamada, H (2002) "Hybrid interface composites: mechanical properties and fracture resistance of composites containing fibres with different silane coupling agents", Third Asian-Australasian Conference on Composite Materials (ACCM-3), Auckland, New Zealand, pp.49-58.
Kim, J.K., Sham, M.L., Sohn, M.S., Hamada, H. (2001) "Effect of hybrid layers with different silane coupling agents on impact response of glass fabric reinforced vinylester matrix composites", Polymer, 42 (17) (2001), pp. 7455-7460.
Kim, J.K., Sham, M.L., Wu, J.S. (2001) "Nanoscale characterisation of interphase in silane treated glass fibre composites", Composites Part A, 32 (5) (2001), pp. 607-618.
--------------------------------------------------------------------------------
Kai TANG
Assistant Professor
(2358 8656 ; mektang@ust.hk ; http://ihome.ust.hk/~mektang)
PhD, University of Michigan (1990)
Software specialist, Applicon Inc (1991-2001)
Current Research Activities:
Solid modeling; CAD/CAM; geometric algorithms; multi-axis surface machining algorithms; feature recognition; robotics algorithms.
Active Projects as Principal Investigator: A geometric method for determining intersection relations in a plane and its applications
RGC - Direct Allocation Grant HK$67,150 01 Feb 2003
Design of a reliable interlocking system for the landing gates of material hoists
Occupational Safety & Health Council HK$290,000 01 Jul 2004
Representative Research Publications:
Wang, Charlie, Tang, Kai (2004) "Algebraic grid generation on trimmed surfaces using non-self-overlapping Coons patch mapping", International Journal of Numerical Methods for Engineering, Vol. 60.
Wang, Guojin, Tang, Kai, Tai, Chiew-Lan (2004) "Parametric representation of a surface pencil with a common spatial geodesic", Computer-aided design, Vol. 36.
Liu, Yongjin, Tang, Kai, Yuen, Matthew (2003) "Manifold-guaranteed out-of-core simplification of large meshes", Visual Computer, Vol. 19.
Tang, Kai, Liu, Yongjin (2003) "Maximum intersection of spherical polygons by an arc and its application to 4-axis machining", Computer-Aided Design, Vol. 35.
Tang, Kai, Joneja, Ajay (2003) "Traversing the machining graph of a pocket", Computer-aided design, Vol. 35.
Tang, Kai, Pang, Anthony (2003) "optimal connection of loops in laminated object manufacturing", Computer-aided design, Vol. 35.
-------------------------------------------------------------------------------- |
|
GO
楼主: qxpydxx
发表于 2006-4-9 13:15:00
转发
